15 watts per Channel, Single Ended Triode design, Pure Class A, Integrated Stereo Amplifier with 300B output tubes. 3 stereo input pairs, Standard with remote volume control. Metallic blue chassis with clear coat finish. ZERO feedback design.
The following section describes the CAD-300SEI basic specifications. The specifications are subject to change without notice or obligation.
| Circuit Type | Single-Ended Class A |
| Power Output | 15 watts |
| Input Sensitivity | .42 Volt for full output |
| Noise and Hum | -90 dB below full output |
| Frequency Response | 20 Hz to 23 KHz +/- .75 dB |
| Inputs | CD, AUX1, AUX2, Headphone jack |
| Tubes | 1 ea – 6SN7 Input 2 ea – 6SN7 Driver 2 ea – 300B Output |
| Power Transformer | 1 ea – EI Laminate, 200% Duty Cycle |
| Output Transformer(s) | 2 ea – EI Laminate Air Gap, 200% Duty Cycle |
| Resistors | 1% Metal Film |
| Capacitors | Oil-Filled Coupling |
| Power Supply Capacitors | 2 ea – 1200µF@250 VDC |
| AC Cord | 3 Conductor, Detachable |
| AC Power Requirements | 117/234 VAC @ 50/60 Hz |
| Consumption | 107 watts – Operation |
| Warm-Up Time | 3 Minutes |
| Break-In Time | 100 hours of playing time |
| Finish | Black Anodized Aluminum Faceplate,Jaguar blue chassis with high gloss Clear Coat finish. Standard with remote control. |
| Weight | 51 lbs |
| Dimensions | 8″ H x 14″ W x 14″ D |