This item is no longer in production or storage.
The Model 7.125 is a seven channel power amplifier rated at 125 watts per channel into an 8 ohm load and 190 watts per channel into a 4 ohm load. The rear panel has XLR and RCA inputs and a remote turn on trigger. With its power output it is capable of driving most multi-channel speaker systems. Quiet, low distortion operation with unmatched reliability.
The following section describes the Model 7.125 basic specifications. The specifications are subject to change without notice or obligation.
| Circuit Type | Solid State, Class A/B |
| Power Output | 7 x 125 watts @ 8 Ohms from 20Hz to 20KHz 7 x 190 watts @ 4 Ohms from 20Hz to 20KHz |
| Input Sensitivity | 1.0 Volts |
| Frequency Response | 20Hz – 20KHz +/- 0.1 dB |
| Signal-to-Noise Ratio | >100dB, “A” Weighted |
| Input Impedance | Nominal 50K Ohms |
| Voltage Gain | 28 dB |
| AC Power Requirements | 117/234 Volts AC @ 50/60 Hz |
| Break-In Time | 100 hours of playing time |
| Audio Input | 7 RCA, 7 XLR |
| Audio Output | 7 pairs of heavy-duty, gold-plated binding posts |
| THD | Less than 0.05% at rated output |
| Crosstalk | Greater than -90dB from 20Hz to 20KHz |
| Damping Factor | Greater than 400 from 10Hz to 400Hz |
| Slew Rate | 50V/mSec |
| Remote Trigger | 3-32v DC at 5mA or greater |
| Rack Mounting | Optional brackets are available for mounting the amplifier in a standard 19 inch equipment rack. |
| Finish | Black epoxy coated steel chassis Silver anodized aluminum faceplate (black optional) |
| Weight | 55 lbs |
| Dimensions | 7” H x 17.7”W x 16.6”D |